Electric Skateboard Project Introduction


Electric skateboards are exploding in popularity right now, however, for most people the cost of a good board is too great and the inexpensive options lack in features and range. As a result, a healthy and growing community has formed around DIY Electric Skateboards, where the goal is to create boards that are tailored to the needs of the builder at a fraction of the cost of a good commercial product. For this project, the goal is to create a DIY board that functions at least as well as the most popular electric skateboard, the Boosted Board, for around half of the cost at $700. Some of the features the board will have include: regenerative braking, cruise control, and a reverse mode (flip which side of the board is the ‘front’).

Wiring diagram for power.


The board will be controlled using a Wii Nunchuck controller as well as various electronics for the propulsion system.

The build list is as follows:

Motor 6355 190KV
Mechanical Kit
VESC Open Source ESC
Battery
Controller
Deck
Battery Connectors Set XT60
Battery Connectors Set XT90S
10 AWG Wire
Parrallel Battery Charging Board


-Andrew

No comments:

Post a Comment